Tube bending workshop aisle in Panyu, Guangzhou

Tube bending · Panyu, Guangzhou · since 2013

Tube Bending Manufacturer in Guangzhou
Ø4–150 mm, Wall 0.8–5 mm

We bend round, square and oval tube from Ø4 to Ø150 mm, wall 0.8–5 mm, for handrails, furniture frames, crash bars and machine frames. Eight bending machines in five diameter classes run alongside laser tube cutting to Ø220 × 6 m. We work in carbon steel, 304 / 316 stainless, aluminium 6061 / 6063 / 7075, copper and brass. Parts ship to eight countries including France and Hungary, with EN 10204 3.1 certificates and salt-spray reports available on request.

Send a drawing on WhatsApp Email the engineer

2013Established in Panyu

Ø4–150 mmTube outside diameter

8 machinesFive diameter classes

8 countriesParts exported to

What we makeOne workshop, four families of part. Every one of them starts from your drawing, not from a catalogue.

Bent tube, any section

Round, square and oval tube, Ø4–150 mm, single or multiple bends in one plane or in space, ends cut square.

Handrail & guardrail components

Handrail bends, corner bends, bent posts and connecting parts. The tube parts — not the finished rail system.

Motorcycle & auto tube parts

Crash bars, engine guards, rear racks, roof ladder racks, handlebars, subframes, centre stands.

Machine & equipment frames

Closed loops, pump frames, seat frames, welded assemblies combining bent tube with laser cut plate.

Full detail with tolerances on tube bending services. Guardrail parts on handrail and guardrail tube components; crash bars and racks on motorcycle and automotive tube parts.

Where it is madeNo stock photography. These are the aisles, the racks and the benches.

Factory entrance in Panyu District, Guangzhou — The entrance on the Panyu side street. Same name on the door as on this page.

Wide view down the workshop aisle — The main aisle, material in on the left, machines down the right.

Tube bending workshop with an operator at a CNC bender — An operator setting up a CNC bender. Setup is where the tolerance is decided.

Overhead view of the tube bending shop floor — Benders in a row, five diameter classes across eight machines.

Bent tube frames stacked on racks after forming — Bent frames waiting for welding. Nothing is stacked before it is checked.

Manual welding and tacking bench for bent tube frames — The welding bench, where a bent tube becomes a part you can bolt on.

How an order runsPrototype first, production second. The first part is the only place where a mistake is cheap.

Drawing in Tube size, wall, material, radius and quantity. A sketch with dimensions is enough to start.
Feasibility The engineer checks radius against die and mandrel, and says yes or no before any price.
Die check Common radius: an existing die is used. Special radius: a new die, about 2 weeks.
Prototype 3 days for standard round tube with a drawing and an existing die.
First article Dimensions checked against the drawing, report issued, then production is released.
Production 25–40 days for volume, partial shipments possible; packed for export.

What is checked at each step, and what the report contains: quality and inspection.

Where the parts goExport is not a claim on this site — it is a list of destinations.

Eight countries so far: Egypt, France, Thailand, Algeria, Sudan, Kazakhstan, Hungary, South Africa. France and Hungary are in the European Union, which is why EN 10204 3.1 mill certificates and salt-spray reports come up early in the conversation.

Packing	Steel frame wrapped in stretch film, or export carton, depending on part size and surface finish
Documents	Commercial invoice, packing list, material certificate on request, dimensional report on request
Shipping terms	Quoted per order against the destination port; partial shipments possible on volume orders

Packed parts, frame and carton, are shown on the quality page — packing is the last inspection point, not an afterthought.

Send a drawingFour fields. If you have the part number and the quantity, that is already enough to start.

WhatsApp — fastest: +86 139 2244 4186
Email: hi@newsiyuantube.com
Telephone: +86 191 2920 6263
Factory: Panyu District, Guangzhou, China
Hours: 08:30 – 18:00 China time, Monday to Saturday

A drawing and a quantity get a feasibility answer first and a price second. If the part sits outside Ø4–150 mm, you hear that in the first reply.